| Notes: | Bekum BM 806D, year 2006
with Barber Coleman control
Head 4 BKZ 200, four parison head, center distance 200 mm
16,515 working hours.
With following Upgrades:
Replace and upgraded pivot pin bushings Replace and upgraded punch cylinders.
Replaced and upgraded the clamp cylinders twice. We have the most recent upgrade installed at the present time Replaced and upgraded parker fittings because of fittings cracking.
Replaced and upgraded clamp cylinder brackets.
Installed water hose covering on hoses that were rubbing.
Replaced and upgraded linear bearings for the knife assembly.
Installed new pin holders that have a tendency of bending if not cleaned every 3 months.
Bekum is aware of all these upgrades and in most cases these upgraded were covered on warranty.
Single extruder - 120mm/24D -
grooved barrel for HDPE
Direct Drive
Voltage 3x480V 60Hz with neutral
Mold length: 470mm
Mold width: 850mm
Mold depth: 2x150mm
Mold opening way: 290/410mm
Mold shuttle way: 870mm
The bottle take away and de-flash station are integrated Head stitch dimension is 200mm - Cavities and Center distance - 4 x 200mm |
|